mirror of
https://github.com/UzixLS/TSConf_MiST.git
synced 2025-07-18 14:51:25 +03:00
update readme
This commit is contained in:
Eugene Lozovoy
90
README.md
90
README.md
@ -1,32 +1,76 @@
|
||||
# [TSConf](http://forum.tslabs.info/viewforum.php?f=20&sid=137db6b31f9fb533b908742c2b18284e) for MiSTer Platform
|
||||
# TSConf for MiST FPGA computer
|
||||
|
||||
This is the port of TSConf (an improvement to the [ZX-Evolution](https://www.facebook.com/zxatmevolution/) ZX spectrum clone) to MiSTer.
|
||||
This is the port of TSConf (advanced ZX Spectrum-compatible platform) to [MiST](https://github.com/mist-devel/mist-board).
|
||||
|
||||
## Features of this port
|
||||
- VDAC 1
|
||||
- RTC
|
||||
- ZiFi (WiFi)
|
||||
- Tape in/out via UART_RX/UART_TX pins
|
||||
- MIDI output via UART_TX pin
|
||||
- TurboSound FM (2x YM2203)
|
||||
- General Sound 2MB
|
||||
- SAA1099
|
||||
- Covox
|
||||
- SounDrive
|
||||
- 2x Kempston/Sinclair/Cursor joystick
|
||||
- Kempston mouse
|
||||
|
||||
## TSConf features
|
||||
- High compatibility with original Pentagon-128 clone
|
||||
- Advanced video features:
|
||||
- Pixel resolutions 360x288, 320x240, 320x200, 256x192
|
||||
- Up to 720x288 Hi-res pixel resolution
|
||||
- Hardware scrolled graphic planes
|
||||
- 256 and 16 indexed colors per pixel
|
||||
- Programmable color RAM with RGB555 color space and 256 cells
|
||||
- 512 and 256 bytes per line addressing
|
||||
- Text mode with loadable font and hardware vertical scroll
|
||||
- Up to 256 graphic screens
|
||||
- Hardware engine for Tiles and Sprites graphics
|
||||
- Up to 85 sprites per line
|
||||
- Sprites sized from 8x8 to 64x64 pixels
|
||||
- Up to 3 sprite planes
|
||||
- Up to 2 tile planes with 8x8 pixels tiles
|
||||
- Up to 16 palettes for sprites per line
|
||||
- Up to 4 palettes for tiles per line for each tile plane
|
||||
- Z80 Memory addressing enhancements:
|
||||
- Programmable RAM page for any 16kB window
|
||||
- Z80 acceleration features
|
||||
- Selectable CPU clock 14MHz, 7MHz and 3,5MHz
|
||||
- 512 bytes of zero-wait RAM for 14MHz
|
||||
- On-the-fly programmable maskable interrupt position
|
||||
- Separate IM2 vectors for different interrupt sources
|
||||
- Advanced hardware features
|
||||
- DRAM-to-Device, Device-to-DRAM and DRAM-to-DRAM DMA Controller
|
||||
|
||||
See details in the official git repository: [link](https://github.com/tslabs/zx-evo/blob/master/pentevo/docs/TSconf/tsconf_en.md)
|
||||
|
||||
## Features of the port
|
||||
* Scandoubler with HQ2x and Scanlines.
|
||||
* RTC.
|
||||
* Configurable CMOS settings through OSD.
|
||||
* Supports both secondary SD and image on primary SD.
|
||||
* Kempston Joystick.
|
||||
* Kempston Mouse.
|
||||
* Turbosound FM (dual YM2203)
|
||||
* General Sound 512KB-2MB
|
||||
* SAA1099
|
||||
|
||||
## Installation
|
||||
place RBF into root of primary SD card. And then you have 3 options:
|
||||
1) Format secondary SD card with FAT32 and unpack content of SDCard.zip to it.
|
||||
2) Create TSConf.vhd image (non-MBR!) with FAT32 format and unpack SDCard.zip to it. Then place TSConf.vhd to root of primary SD card.
|
||||
3) same as 2, but name the file boot.vhd and place it into TSConf folder on primary SD card.
|
||||
Place TSConf.ROM, TSConf.R01 and RBF file from [release](release/) folder into root of SD card.
|
||||
|
||||
Put some TAP, SNA, SCL, TRD, SPG files to secondary SD card (or to TSConf.vhd image) as well.
|
||||
Also you need to place TSConf.VHD file with Wild Commander and your games and demos. [There is](release/) example VHD to start with. \
|
||||
As alternative to VHD you can just unzip Wild Commander into root of your FAT32-formatted SD card.
|
||||
|
||||
By default, if everything is done right, Wild Commander will be loaded where you can choose the games to start.
|
||||
By default, if everything is done right, Wild Commander will be loaded where you can choose software to start.
|
||||
|
||||
## VHD files
|
||||
You can make several VHD files and put them into TSConf folder on primary SD card and then choose from OSD.
|
||||
|
||||
### Note
|
||||
Although original CMOS setting page can be launched (CTRL+F11), the settings made there won't have effect. You need to use OSD for CMOS settings.
|
||||
## Usage
|
||||
Original TSConf F12 key (reset) is transferred to F11. \
|
||||
To enter BASIC press Shift+F11. \
|
||||
To enter TS-BIOS Setup Utility press Ctrl+F11. By default these setting are volatile and lost after MiST reset. To save them - open OSD menu (with F12 key) and tap "Save NVRAM settings".
|
||||
|
||||
Original TSConf F12 key (reset) is transferred to F11.
|
||||
|
||||
## Software
|
||||
- Wild Commander: https://forum.tslabs.info/viewtopic.php?f=26&t=143
|
||||
- ZiFi: http://zifi.vtrd.in/
|
||||
- Demos and games: https://prods.tslabs.info/
|
||||
|
||||
|
||||
## Credits
|
||||
- TSConf official git repository - [link](https://github.com/tslabs/zx-evo/tree/master)
|
||||
- TSConf official forum - [link](http://forum.tslabs.info/viewforum.php?f=20&sid=137db6b31f9fb533b908742c2b18284e)
|
||||
- Original TSConf port for MiSTer (on base of which this port was created) - [link](https://github.com/MiSTer-devel/TSConf_MiSTer)
|
||||
- T80 - Z80 HDL implementation
|
||||
- JT12 - Yamaha OPN HDL implementation - [link](https://github.com/jotego/jt12)
|
||||
|
||||
Reference in New Issue
Block a user