uzix/picocom
1
0
Fork 0
mirror of https://github.com/UzixLS/picocom.git synced 2025-07-19 07:21:18 +03:00
Code Issues Projects Releases Wiki Activity

Just updated some comments

Browse Source
This commit is contained in:
Joe Merten
2017-12-31 07:42:00 +01:00
parent b78410aa04
commit 4e9f42f686
4 changed files with 10 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
CONTRIBUTORS
View File

@ -54,9 +54,10 @@ comments:
- Cody Planteen (https://github.com/planteen) contributed the
implementation of the toggle-RTS command.
- Joe Merten (https://github.com/Joe-Merten) contributed the
- Joe Merten (https://github.com/JoeMerten) contributed the
--lower-rts and --lower-dtr options, custom baudrate support for
OSX, the --logfile option implementation, and several bug-fixes.
FreeBSD and macOS, the --logfile option implementation, and several
bug-fixes.
- Maciej Grela (https://github.com/mgrela) contributed the initial
--initstring option implementation.

2
custbaud_bsd.c
View File

@ -3,7 +3,7 @@
*
* Custom baud rate support for BSD and macOS.
*
* by Joe Merten (https://github.com/Joe-Merten www.jme.de)
* by Joe Merten (https://github.com/JoeMerten www.jme.de)
*
* ATTENTION: BSD and macOS specific stuff!
*

2
custbaud_bsd.h
View File

@ -3,7 +3,7 @@
*
* Custom baud rate support for BSD and macOS.
*
* by Joe Merten (https://github.com/Joe-Merten www.jme.de)
* by Joe Merten (https://github.com/JoeMerten www.jme.de)
*
* ATTENTION: BSD and macOS specific stuff!
*

10
picocom.1.md
View File

@ -96,7 +96,7 @@ here.
: Toggle the RTS line. If RTS is up, then lower it. If it is down,
then raise it. Not supported if the flow control mode is RTS/CTS.
Only supported in Linux and OSX.
Only supported in Linux and macOS.
**C-backslash**
@ -369,13 +369,13 @@ Picocom accepts the following command-line options.
: Lower the RTS control signal after opening the serial port (by
default RTS is raised after open). Only supported when
flow-control mode is not set to RTS/CTS, ignored otherwise. Only
supported in Linux and OSX.
supported in Linux and macOS.
**--lower-dtr**
: Lower the DTR control signal after opening the serial port (by
default DTR is raised after open). Only supported in Linux and
OSX.
default DTR is raised after open). Only supported in Linux and
macOS.
**--exit-aftrer** | **-x**
@ -584,7 +584,7 @@ operation and what happens in each such condition:
original settings, and the modem-control lines are cleared signaling
a modem reset, subject to the **--noreset** and the **--hangup**
options. After that picocom exits with a success status.
- The quit command is seen in the standard input. That is, the escape
character is seen (default **C-a**), followed by the quit command
character (default **C-q**). The behavior in this case is similar to